Making steel sheets in spiritfarer is a fun and easy way to make some extra money. All you need is some steel sheeting, a saw, and some Spirit Faree. To start, cut the steel sheeting into desired size. I usually use 12" by 18", but it really doesn’t matter what size you choose. Once the sheeting is cut, sand it down to a smooth finish. Now it’s time to start sawing! Make sure your saw is set up for standard blade height and depth (usually 3/8" or less). When sawing the steel sheeting, be sure to keep the blade moving in all directions so that the cuts are evenly spaced out. Once the steel sheeting has been cut into desired size, fit it onto the saw’s blade and start cutting! Be sure to keep your hand close to the blade so that you don’t lose any of the metal while cutting. Once everything is cut, remove the excess steel from around each edge of the sheeting by using a sharp knife or scalpel. Now it’s time to finish up by hot-wiring each end of each piece of steel sheeting together! This will create an extra strong and durable structure!
